![Install Power Socket Singapore Price [2026]](/assets/images/opt/electrical4-1024.jpg)
Running out of power points is one of the most common complaints in Singapore homes — especially older HDB flats built before everyone owned five charging devices, an air fryer, and a standing fan. If you're planning to add one, here's what you need to know before you call an electrician.
In Singapore, installing a new power socket typically costs $60 to $180 per point, depending on whether the wiring is surface-mounted or concealed, the type of socket, and how far it is from your existing distribution board. Let's break this down properly.
Power Socket Installation Price List Singapore 2026
| Type of Installation | Estimated Price |
|---|---|
| Standard single 13A socket (surface wiring) | $60 – $130 |
| Standard double 13A socket (surface wiring) | $60 – $150 |
| Concealed wiring socket (hacking required) | $150 – $300+ |
| Weatherproof / outdoor socket | $80 – $150 |
| Socket with built-in USB ports | $60 – $130 |
| Heavy-duty / industrial socket | $100 – $220 |
| Replacing an existing socket | $40 – $100 |
| Relocating an existing socket | $60 – $150 |
Prices above are per point. If you're adding several sockets during a renovation or rewiring project, ask for a bundled rate — it's almost always cheaper than booking separate visits.
What Affects the Price
Surface vs. concealed wiring. Surface-mounted trunking is the faster, cheaper option — the cable runs along the wall in a casing. Concealed wiring is neater but requires hacking into the wall, patching it up afterward, and more labour hours overall. This is usually the biggest single factor in your final price.
Distance from your DB box. The further the new socket is from your distribution board, the more cable and labour is needed to connect it safely.
Socket type and load. A basic 13A socket for lamps and small appliances is the cheapest option. Sockets for high-draw appliances — ovens, washing machines, aircon isolators — need heavier-duty wiring and cost more.
Site condition. Older HDB blocks sometimes have ageing wiring behind the walls, which can mean extra work (and cost) to safely tie in a new point.
Number of points. As with most electrical work, doing several sockets in one visit brings the per-point price down.
New Point vs. Replacement vs. Relocation
These three jobs sound similar but price out differently:
- New point means running a completely fresh line to a spot with no existing wiring — the most labour-intensive option.
- Replacement swaps a faulty or old socket for a new one using the wiring already in place — quick and the cheapest option.
- Relocation moves an existing socket to a new spot nearby, which needs some new cable run but not a full fresh circuit — priced in between the two.
If your socket is simply loose, cracked, or not holding a plug securely anymore, a replacement is usually all you need — no reason to pay for a brand-new point.
Common Socket Types in Singapore Homes
Singapore mainly uses the Type G socket — the three-pin, 230V standard you'll see in every HDB flat and condo. For heavier appliances like microwaves or grinders, some homes also use Type M sockets, which handle higher loads safely. If you're upgrading a kitchen or laundry area, it's worth telling your electrician what appliances you're planning to run, so they can recommend the right socket type and wiring gauge from the start — rather than needing an upgrade later.
Is DIY Power Socket Installation Legal in Singapore?
No — and this one matters. Under Singapore's Electricity Act, any new power point or rewiring work must be carried out by a Licensed Electrical Worker (LEW). This isn't just a formality. Incorrect socket wiring is a genuine fire and shock hazard, and unlicensed work can also void your home insurance if there's ever an incident. Always ask to see your electrician's LEW number — you can verify it against the public registry on EMA's website before work begins.
Signs You Need More Power Points
- Extension cords running across your living room floor
- Multi-plug adaptors overloaded with chargers, lamps, and appliances
- Sockets feeling warm to the touch (a warning sign — turn it off and call an electrician immediately)
- Planning a kitchen or workspace upgrade that needs dedicated points for new appliances
Why Choose Luminous Engineering for Power Socket Installation
At Luminous Engineering, our licensed electricians handle everything from a single socket swap to full point additions across your home, with itemised quotes so you know the price before any wall gets touched. We assess your existing circuit load first — so a new socket doesn't end up tripping your breaker every time you plug something in.
Our socket & switch services cover HDB, condo, and landed properties island-wide, and pair well with our broader electrical wiring and DB box services if you're planning a bigger upgrade.
Need more power points at home? Get a free, no-obligation quote — just send us a photo of the area and how many sockets you need.
FAQ: Power Socket Installation Price Singapore
Why is concealed wiring so much more expensive than surface wiring? Concealed wiring means hacking into the wall, running cable through it, then patching and repainting — much more labour than surface trunking.
Can I install a power socket myself? No. Singapore law requires all new electrical points to be installed by a Licensed Electrical Worker, both for safety and insurance validity.
How do I know if I need a new point instead of just a replacement? If you want power somewhere it doesn't currently exist, that's a new point. If your current socket is faulty but in the right spot, a replacement is usually enough and cheaper.
Does adding multiple sockets at once save money? Yes — bundling several sockets into a single visit is almost always cheaper per point than booking them separately.
What socket type do I need for a washing machine or oven? Higher-draw appliances usually need a dedicated, heavier-duty circuit — flag this to your electrician so they wire it correctly the first time.
How long does a socket installation take? A single surface-mounted socket usually takes under an hour. Concealed wiring or multiple points can take a few hours depending on scope.
